When you have finished creating your entries, areas and
rules, you can then test your repagination rules with the sample
data file you have opened. You can also save the repaginated
output and return to FTDesign to continue designing your form
with that repaginated output.
To test your rules and save the output from your test:
- Select Test from the Tools
menu.
- The Repagination done window will be
displayed containing the output from the repagination
process according to the rules you have created. You should
see your sample data has been reformatted, where:
- Header appears at the top and only
once for each document.
- Footer appears directly under the
header and only once for each document.
- Data areas are printed continuously
without header or footer information separating them.
You should ensure ALL required data areas appear in the
output.
- Click Save to save the output from the
repagination process to a location on your system.
- Click Close to close the Repagination
done window and return to the FormTrap Repaginator.
|